Thunderbolt Masonry Fixings Various Sizes: From

^{Thunderbolt Masonry Fixings - Various Sizes}

Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone.

It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications.

The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt.

Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.

Truly versatile, Thunderbolt™ is available in a zinc & yellow finish in diameters M8-M16 and lengths 60mm-200mm.

How Thunderbolts Work

• Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust
• Remove any loose debris from the hole.
• Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action
• Tighten the Thunderbolt™ to secure the fixture firmly in place.

Diameters Available Hex Head Thunderbolts (No flange as shown): M8, M10, M12, M16,