FREE DELIVERY OVER £50.00 / PRICE SHOWN EXCLUDES VAT
Stove Paint Spray Hotspot Matt Black: Choose From 3 Can Sizes: Priced from Pricing
Stove Paint Spray Hotspot Matt Black: Choose From 3 Can Sizes: Priced from
Stove and Fireplace Paint is an ultra-high temperature corrosion resistant one coat stove and fireplace paint specially formulated for use on wood or multi-fuel stoves, gas coal/log effect fires, fireplaces, grates, baskets, fire backs, barbecues, pipes, flues etc. Extra coverage over conventional systems results from the high solids content. Most substrates including steel and its alloys can be coated successfully however, we recommend that each new substrate should be checked individually for its suitability. This specially formulated fireplace and stove paint provides corrosion and abrasion resistance may be achieved by oven curing although curing will take place during operation of the product or components. A thin coating of fireplace and stove paint allows excellent heat transmission and is colour fast up to 650°C, when allowed to cure for 24 hours.
Directions for use
Ensure fireplace or stove (or other surface) to be treated is cool and any heat source is extinguished.
Remove all rust, scale, dirt, grease and check surface is dry.
Apply by brush or spray.
Agitate paint until well mixed.
Recommended thickness 22 microns ± 3 microns.
In practice this means apply in thin coats, allow to fully dry before applying next coat.
Building up in layers this way gives maximum high temperature resistance.
Coverage approximately 15m²/Litre at 22 microns.
Use only Xylene based thinners.
Touch dry in 2-3 hours at room temperature.
Oven cured - 30 minutes at 250°C metal temperature.
Adequate ventilation should be provided at all stages of the curing operation.
Caution: This stove and fireplace paint contains free silicone and precautions should be taken to isolate its processing from other paint systems.