Joint-It Simple is a ready-mixed, permeable, jointing compound that can be applied in all weathers.
STEP 1: PREPARATION
Make sure all joints are clear of any dirt, oil, grease and debris.
Make sure all joints are cleaned out to a minimum depth of 20mm and a width of at least 3mm.
STEP 2: PRE-WET
Soak the area well prior to opening and spreading Joint-It Simple.
STEP 3: POUR
Open the tub and immediately pour Joint-It Simple onto the area.
STEP 4 : WORK-IT-IN
Using a squeegee or street broom, spread Joint-It Simple evenly.
Work-it-in so that it goes deeply into the joints and is well compacted.
STEP 5: ADD MORE WATER
Add more water sparingly to help Joint-It Simple flow into the paving joints.
Work diagonally across the joints to make sure that Joint-It Simple has penetrated all of the paving joints.
STEP 6: FINAL CLEANING
Clean the surface carefully with a fine-hair broom so that all Joint-It is removed
Always sweep diagonally across the joints.
Any residual materials can be swept off after application using a soft broom.