Thunderbolt Masonry Fixings M6 Countersunk Torx Head

^{Thunderbolt Masonry Fixing - Countersunk Torx Head M6,}

^{Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone,}

^{It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications,}

^{The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt,}

^{Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation,}

^{Truly versatile, Thunderbolt™ with flange on head is available in a zinc & yellow finish in diameters M6 and lengths 50mm-150mm,}

Product Information:

• Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust,
• Remove any loose debris from the hole,
• Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action,
• Tighten the Thunderbolt™ to secure the fixture firmly in place,
• Diameters available countersunk torx head thunderbolts: M6.